Aremco Products
welcome products contact
Powered By PayPoint and PayPal
Aremco Products
register
checkout

Untensioned Safety Fencing

back

Armco, an Untensioned Corrugated Beam system is a safety barrier widely used for low impact, low speed applications such as car parks, residential areas and industrial sites to protect people, machinery and buildings inside and outside - NOT FOR MOTORWAYS, DUAL CARRIAGEWAYS AND NATIONAL SPEED LIMITED HIGHWAYS)

This very simple, untested system consists of a 'W' shaped corrugated beam, 3.2M effective, fixed to a built in or floor mounted post, holed for single and double height beams.

NOTE This Off Road barrier system is supplied as a visual and partially restraining deterrent for low speed vehicular impacts, e.g. adjacent to private buildings and walkways.

The 'W' beam used with the system original from the highway system 'W' beam used in the UK for many years.  The 'standard' I section post is the traditional Off Road post chosen for its stiffness.  'Z' shaped posts are also available, and although not being as strong as the I section post, may offer a more economical barrier arrangement.  The strength is dependent on the properties of the chosen post/strength and size of the foundations and base plate anchors (were applicable).

These barriers are offered on an untested/supply only basis to the customers site specific requirements. 

The barrier rail system is manufactured from mild steel and is galvanised to offer a level of protection against corrosion.

Delivery Time: Dependant upon quantities.

 

It is designed to both protect areas from damage by passing vehicles and to smoothly re-direct traffic onto a course as near as possible parallel to the barrier if out of control.

This Barrier is for off highway use only. 

The barrier rail system is manufactured from mild steel and is galvanised to offer a level of protection against corrosion.

Delivery Time: Dependant upon quantities.

The corrugated mild steel beams are formed from 3mm thick material and supplied in standard lengths of 3500mm (3200mm effective). All rails come complete with a centre slot at 1600mm centres for additional posts if required.

Standard posts are available as follows:-

Roadside use:-

(1) 125mm x 90mm x 6mm x 1225mm "Z” Section Post (for excavated foundation).

Off-Highway Use:-

(2) 125mm x 90mm x 5mm x 1200mm "Z” Section Post (for excavated foundation).

(3) 127mm x 76mm RSJ Post (Type P224) c/w base plate for bolting to concrete surface.

Extras:-

Fishtail End Terminations

Pedestrian Friendly End Terminations

Yellow Plastic Ends

90 Deg Internal or External Fitting

M16 Lap Bolts (8 No. required per overlap of rail and 4 No. per Fishtail)

M16 Post Bolts (1 No. per post)

M20 Foundation Bolts (4 No. per post)


Barrier dimensions are:- 3.5M (3.2M Effective Length) x 85mm deep x 310mm wide

Fishtail dimensions are:- 700mm long x 85mm deep x 250mm wide

Post dimensions are:-

  • RSJ Floor Mounted Post 127mm x 76mm x 547mm
  • RSJ Floor Mounted Post 127mm x 76mm x 747mm
  • Z Section Build In Post 125mm x 85mm x 5mm - 1200mm long 


Call for Pricing

By continuing to use the site you agree to our privacy & cookies policy